Arama Sonuçları

Dewaxer DEWAX Dewaxer Unit Compact size Stainless steel tank Steam heating tank, DEWAX 5 is used to remove wax from cylinders and flasks, to reduce fumes emission during the pre-heating phase, or as soft water bath for plastic materials. DEWAX 5 can work at a temperature from 30°C up to 90°C. The tank, entirely in stainless steel, has a capacity of 4 lt (corresponding to 6 large half flasks, or to 6 casting rings model 6X). Technical Data Energy (V/Hz) Power (Kw) Max temperature (°C) Dimensions (W x H x D) 230 -50 0.83 90 20x20x40 Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Presses System PRESS OL463 Press System Oil closed circuit without filling up need Nodular cast iron base for a perfect hermetical sealing Capacity: 3 flasks Sturdy and reliable, the OL463 press can host 3 flasks at a time, exerting a working pressure of 200bar maximum, even though is it built to bear a working load of max.400bar. Equipped with oil-pressure closed circuit, OL463 does not need periodical oil filling up. Technical Data Working pressure (bar) Max. pressure (bar) Exerted force (Kg) Weight Capacity 200 400 15.000 20 3 flaks Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Polymerizing Machine ACRYDIG Polymerizing Unit Entirely manufactured in stainless steel Intuitive programming Water level sensor Easy water drain ACRYDIG polymerisers are made entirely of stainless steel to ensure a long service life. The special closing lid prevents vapour dispersion and condensate dripping, thus ensuring a polymerisation cycle in a steam-saturated atmosphere. The large opening and the adequate dimensions of the polymerisation tank allow a rational arrangement of the muffles. The control electronics allow single or two-stage polymerisation cycles, the management of a pre-start time, automatic shutdown at the end of the cycle and constant display of the progress of the process. These parameters allow controlled polymerisation with natural cooling, which avoids the micro-fractures of the resin caused by excessive cooling. The Acrydig is also equipped with a side tap for rapid emptying of the polymerisation chamber. The safety of the heating cycle is ensured by a sensor that constantly monitors the presence of water inside the chamber; in case of insufficient water level, the system automatically stops heating. The Acrydig family consists of two models with different capacities: 6 or 12 bracketed muffles. Technical Data Power (W) Chamber width (cm) Chamber depth (cm) Chamber useful height (cm) Capacity Weight 1100-1400 15-26 31 26 6-18 9-11 Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Steamer Machines NEPHELES/ HYDRONEPHELES Steamer Unit Boiler entirely in stainless steel High insulating thermic protection Reaching the working pressure in 10 minutes only Automatic (Hydronepheles model only) or manual water refilling Safety cap Power Supply: 110V 50/60 Hz;230V 50 Hz; 230V 60 HZ Nepheles and Hydronepheles are steam generators expressly designed for the dental laboratory, and provided with a capacious boiler entirely in stainless steel. The high thermic insulation and the immersion resistance grant high performances with reduced power consumption. A specially provided valve cap prevents the boiler opening under pressure and protectsthe equipment from the danger of over pressure. Hydronepheles is equipped with a water level control device allowing the automatic refilling when connected directly to a water tap, through frequent micro-refilling operations in order to keep temperature and pressure constant. Technical Data Power (W) Boiler capacity (lt) Dimensions (W x H x D) Weight 1900 4.5 32x38x38 18 Kg Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Galileo 4.0 GALILEO 4.0 Laser Welding Machine Touch screen 7” Binocular Microscope 10x UV e Laser radiation shield Pulse Shaping Argon Gas Ready Remote Diagnosis THE NEW GALILEO 4.0, latest addition to our range of laser welders, can weld any metal orthodontic structure – including Titanium –with the utmost precision. This laser is equipped with an enhanced cooling circuit, and it’s a plug-and-play device, immediately installed and ready to use in any location within the lab. Entirely re-designed and upgraded in several functionalities, the GALILEO 4.0 is available in the 70 and 100 joules version. The working chamber is wide, and based on the dental technician’s needs; the screen is now a also a handy 7” that can also visualize the working chamber and remotely connect for diagnosis. An adjustable nozzle supplies the Argon gas, essential for Titanium welding and improving the result on any alloy. Technical Data MODEL Laser Source Wavelength (nm) Energy (J) Avarange Power (W) Peak Power (kW) GALILEO 4.0 70 Nd Yag 1064 70 70 7 GALILEO 4.0 100 Nd Yag 1064 100 75 7 Shot duration (ms) Spot diameter (mm) Pulse Frequency (Hz) Lighting Dimensions(mm) Cooling system 0,5 ÷ 20 0,2 ÷ 2 1-20 Led 500x710x515 Radiator 0,5 ÷ 20 0,2 ÷ 2 1-20 Led 500x710x515 Double Radiator Touch screen 7” Microscope 10X Ethernet Connection Wi-fi Remote Diagnostic Laser Pointer + + + Optional Optional Optional + + + Optional Optional Optional Mouse Wi-fi USB Port Joystick Power (V) Optional + + 230V 50/60Hz Optional + + 230V 50/60Hz Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Flasks, Clamps and Presses Ayrıntılar CLAMPS Ayrıntılar FLASKS Ayrıntılar PRESSES Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Wax Carving and Wax Pots Ayrıntılar WAX CARVING Ayrıntılar BUNSEN Ayrıntılar WAX POTS Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Separating Fiber Discs Ultra flexible discs with glass fibre for cutting metal, ceramic and zirconia. The glass fibre provides elasticity and strength while maintaining high operating performance. Available with aluminium oxide, silicon carbide or diamond. RED YELLOW For metal with aluminium For ceramic with silicon carbide TESLİMAT TESLİMAT WHITE For ceramic and zirconia with diamond TESLİMAT Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Model Trimmer Machine TG LINE Wet Trimmer Machine Silent Operation Easy Front Door Opening Adjustable Model Holding Plate Solenoid Valve for Saving Water Automatic Stop for Safety Available with Diamond Disc TG Line is a silent and sturdy water model trimmer specifically designed for the dental laboratory requirements. It guarantees a smooth and even levelling of the model surface, thus minimizing the abrasive disc smearing. The front panel can be removed very quickly, enabling an effortless change of the abrasive disc, also available in diamond abrasive surface. The model holding plate with easy guidelines, is adjustable in 3 different positions. TG Line is additionally equipped with a solenoid valve avoiding useless water consumption when the equipment is not working, and with a protection device against any accidental start of the motor. Technical Data Rotation Speed Power Supply Power Output Dimensions (W x H x D) Ø (Trimmer disc) Weight 2.800 rpm 230 V - 50/60 HZ 1000 W 34x43x35 234 mm 9.2 " 18 Kg Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

UD500 AU Automatic Dry Milling Machine UD500 AU Automatic Dry Milling Machine 5-Axis dry milling machine Automatic changing tools module Remote monitoring system Automatic calibration module Automatic disc changer RFID disc intelligent identification module Loniser module Automatic tooth removal module 1.8kW spindle UD500 AU digital and intelligent dental milling machine is the best choice for building a digital lab. It adopts the development concept of high automation, which can help the lab to complete the processing of zirconia, resin and other materials. With the trend of more and more preshade zirconia blocks being used in labs, the frequency of manual disc changing has been greatly increased. The UD500 AU is equipped with 8-slot automatic disc changer, which can greatly improve production efficiency and reduce labor costs. At the same time, the automatic disc changing function also realizes unattended milling at night, and realizes 24/7 milling. In addition, a series of automatic functions such as automatic tooth removal and automatic calibration can reduce the direct participation of personnel, standardize the production process, and ensure production stability. Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

S7 Sintering Furnace S7 Fast Sintering Furnace Conventional sintering and fast sintering can be switched 20 preset programmes Quick heating rate (up to 120 °C/min.) Pre-drying (Only for silicon carbide rods) Drying can be integrated into the sintering program Larger combustion chamber Simultaneous sintering of up to 100 units when stacking three sintering trays Continuous sintering Set one holding temperature, and the sintering starts from the holding temperature, saving the heating time Working status indicator One-click temperature calibration Wifi online program upgrade Resume sintering after power failure S7 Zirconia Fast Sintering Furnace is a product specially designed for zirconia sintering. S7 adopts the development standard of high intelligence and high automation, which can help labs and clinics to complete the sintering work of zirconia well. S7 is equipped with [high-purity U type molybdenum silicide rods *3][high-purity double-spiral silicon carbide rods *4] with precise temperature control and no pollution. It can achieve two sintering modes, fast and normal, and ideal zirconia sintering effect can be obtained in both modes. In addition, the equipment is also equipped with a number of inteligent functions such as continuous sintering, rapid cooling, and pre-drying, and is committed to creating a better product experience for users, improving user production efficiency and reducing user usage costs. Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar

Casting Machines VULCANO Casting Machine Automatic actuator Easy selection Completely autonomous (power socket only) Plug-and-play Compact benchtop More than 50 uninterrupted castings STANDALONE: no compressed air required Compact table-top format Integrated cooling with radiator VULCANO is the ultimate casting machine, which can be used in any space in the laboratory. The rotation speed adjustment is controlled by a microprocessor, which therefore guarantees the correct injection of the molten metal. The perfectly balanced centrifuge arm is extremely quiet and vibration-free. Thanks to the adjustable cylinder holder, any type of metal or expansion cylinder can be used. The low consumption (only 2.8 kW) and high performance allow the operator to work in maximum safety and energy efficiency. Technical Data Energy (V/Hz) Maximum power (W) Sound pressure level dB(A) Dimensions (W x H x D) Melting time 30gr CrCo Weight 230 -50/60 2860 <70 70x65x47 60 65 Kg MILLENNIUM Casting Machine Self-diagnosis of circuits and safety devices Microprocessor-controlled melting power adjustment Pneumatic movement of the melting coil Built-in cooling Suitable for skeletal fixed and combined prosthetics No vibrations Quiet operation Optical temperature contro Automatic casting cycle EBST (Electronic Board Selected Tolerance) Millennium is the synthesis of 60 years of experience in the field of induction investment casting. Specially designed for the atmospheric melting of precious and non-precious alloys, it offers extremely short melting times (30 g of Cr-Co in just 60 seconds!!) and intense work cycles thanks to the EBST type solid state generator (Electronic Board Selected Tolerance – only available in the “HD” versions) capable of 40 consecutive melts. The melting power is regulated by the sophisticated control system, which allows rapid but gentle melting that preserves the alloy from any alterations. The temperature of the alloy is constantly monitored by an optical system that offers a rapid and precise reading and allows an automatic melting cycle to be set. The starting and rotation speed of the motor is regulated by a microprocessor for correct injection of the molten metal. The centrifugal arm is designed to minimise noise and vibration. Thanks to the adjustable cylinder holder, it is possible to use any type of cylinder, whether metal or free-expansion. The low power consumption (only 2.4 KW) and the high performance allow the operator to work in energy saving and with maximum safety. Also available in the “S” version, without temperature control for those who wish to melt “by eye”. Technical Data MILLENIUM S MILLENIUM R MILLENIUM D Power Supply (V/Hz) 230 -50/60 230 -50/60 230 -50/60 Maximum power (W) Dimensions (Cm) Net weight (Kg) Sound pressure level dB(A) Melting time 30gr CrCo Air Pressure eye-controlled casting temperature optic control heavy duty working load 2860 2860 2860 70x56x47 78 <70 60 6x10 5 Pa (6 Bar) + - - 70x56x47 78 <70 60 6x10 5 Pa (6 Bar) 70x56x47 78 <70 60 6x10 5 Pa (6 Bar) - + - - - + Contáctenos Vía Valpellice, 72 10060 San Secondo de Pinerolo (A ITALIA +39 0121 50 15 61 info@manfredidigital.com Nombre de pila Apellido Correo electrónico Mensaje ¡Gracias por enviar! Enviar